ARIA
d9260007d1
Address three fan-settings issues: 1. Profile view: show a fan icon next to a profile's name when it has a saved fan curve, so it's clear which profiles carry custom fans. 2. Fan curve persistence: the active fan curve was in-memory only and lost on every server restart. It is now persisted per-GPU in /etc/nvcurve/config.json (fan_curves) and re-applied at server startup, so an applied curve survives restarts. All fan-curve state changes route through _activate_fan_curve/_deactivate_fan_curve helpers that keep the persisted state in sync (apply, reset, and profile apply). 3. Point removal: the fan-curve remove button was nearly invisible. The chart remove control is now always faintly visible with an X glyph, the table remove button is larger with a tooltip, and a hint line explains how to add/remove points. Also includes a formatting pass over the two edited frontend files.
43 lines
1.6 KiB
Python
43 lines
1.6 KiB
Python
"""User-configurable settings with sensible defaults."""
|
|
|
|
from dataclasses import dataclass, field
|
|
|
|
|
|
@dataclass
|
|
class Config:
|
|
# Safety limits
|
|
max_delta_khz: int = 3000_000 # ±3000 MHz hard cap
|
|
auto_snapshot: bool = True # Save snapshot before every write
|
|
max_snapshots: int = 20 # Maximum snapshots to keep (0 = unlimited)
|
|
|
|
# Monitoring
|
|
poll_interval_s: float = 1.0 # WebSocket monitor poll rate
|
|
|
|
# API server
|
|
host: str = "127.0.0.1"
|
|
port: int = 8042
|
|
|
|
snapshot_dir: str = "/var/cache/nvcurve/snapshots"
|
|
profile_dir: str = "/etc/nvcurve/profiles"
|
|
|
|
# Authentication: path to the bcrypt user store. If the file exists and
|
|
# contains at least one user, the API requires login (dual mode). If it is
|
|
# absent or empty, the server runs with no authentication.
|
|
users_file: str = "/etc/nvcurve/users.json"
|
|
|
|
# Per-GPU default profiles: applied automatically on server startup.
|
|
# Key = stable GPU identifier (UUID string, "pci:{bus_id}", or "idx:{n}" fallback).
|
|
# Value = profile name (str).
|
|
auto_load_profiles: dict[str, str] = field(default_factory=dict)
|
|
|
|
# Per-GPU active fan curves: restored automatically on server startup so a
|
|
# curve applied via the UI survives server restarts (fan control itself is
|
|
# volatile — the driver reverts to automatic mode on reboot).
|
|
# Key = stable GPU identifier (same as auto_load_profiles).
|
|
# Value = list of {"temp_c": int, "fan_pct": int} sorted by temp_c.
|
|
fan_curves: dict[str, list] = field(default_factory=dict)
|
|
|
|
|
|
# Module-level default config instance.
|
|
default_config = Config()
|