README.md

@@ -13,7 +13,7 @@ NVCurve brings MSI Afterburner-style per-point voltage-frequency curve control t
 
 > [!IMPORTANT]
 > **Blackwell GPU memory** — This is a specialized fork with extended memory offset support (up to +3000 MHz) for Blackwell GPUs (RTX 50-series). \
-> **Fan Controls** — There is an additional "Fans" tab to setup a customized fan curve. \
+> **Fan Controls** — There is an additional "Fans" tab to setup a customized fan curve, controlling all fans or individual fans. \
 > **Dashboard** — The default tab is an Dashboard with additional information (PCIe link speed, VBIOS information, Max Core Clock, Throttle Reason and much much more.) \
 > **Authentification** — For production deplyoment, I added authentification with bcrypt hashing to allow only one or multiple people to have access. \
 > Installing the pre-built PyPI package will NOT include these features. You must build from source.

docs/Overview.md

@@ -17,7 +17,7 @@ NVCurve provides two ways to interact with your GPU:
 
 - **Per-Point Curve Editing** — Adjust the frequency offset for any individual voltage point on the V/F curve.
 - **Extended Memory Offset** — Memory clock offset up to +3000 MHz (Blackwell GPUs). Standard NVCurve caps at +1000 MHz.
-- **Fan Curve Control** — Custom temperature-to-fan-speed curves via NVML, adjustable through the web UI and savable in profiles.
+- **Fan Curve Control** — Custom temperature-to-fan-speed curves via NVML (all fans or individual fans), adjustable through the web UI and savable in profiles.
 - **Curve Flattening** — Select multiple points and flatten them to a common frequency using anchor-point targeting.
 - **Live Monitoring** — Track GPU voltage, clock speed, temperature, and power draw in real time via NvAPI and NVML.
 - **Profile Management** — Save, load, and switch between named profiles. Set a default profile that auto-applies on startup.

frontend/src/api/client.ts

@@ -168,9 +168,9 @@ export const api = {
 
   /** Fan control */
   fans: (gpuIndex: number) => get<FanState>("/fans", gpuIndex),
-  updateFans: (curve: FanPoint[], gpuIndex: number) =>
+  updateFans: (curve: FanPoint[], gpuIndex: number, fans?: number[] | null) =>
-    post("/fans", { curve }, gpuIndex),
+    post("/fans", { curve, fans: fans ?? null }, gpuIndex),
   resetFans: (gpuIndex: number) => post("/fans/reset", undefined, gpuIndex),
-  setFanSpeed: (fanPct: number, gpuIndex: number) =>
+  setFanSpeed: (fanPct: number, gpuIndex: number, fan?: number | null) =>
-    post("/fans/speed", { fan_pct: fanPct }, gpuIndex),
+    post("/fans/speed", { fan_pct: fanPct, fan: fan ?? null }, gpuIndex),
 };

frontend/src/components/Fans/FanCurveEditor.tsx

@@ -2,7 +2,7 @@ import { useState, useEffect, useRef, useCallback } from "react";
 import { Check, X, RotateCcw, Plus } from "lucide-react";
 import { api } from "../../api/client.js";
 import { useCurveStore } from "../../store/curveStore.js";
-import type { FanPoint, FanState } from "../../types.js";
+import type { FanInfo, FanPoint, FanState } from "../../types.js";
 import { toast } from "sonner";
 import { ConfirmDialog } from "../common/ConfirmDialog.js";
 
@@ -44,6 +44,29 @@ function yToFan(y: number) {
   return Math.round(FAN_MAX - ((y - PAD.top) / PLOT_H) * (FAN_MAX - FAN_MIN));
 }
 
+function sameTargets(
+  a: number[] | null | undefined,
+  b: number[] | null | undefined,
+) {
+  if (a === null || a === undefined) return b === null || b === undefined;
+  if (b === null || b === undefined) return false;
+  if (a.length !== b.length) return false;
+  return a.every((v, i) => v === b[i]);
+}
+
+function fanLabel(targets: number[] | null): string {
+  return targets === null
+    ? "all fans"
+    : targets.map((i) => `Fan ${i + 1}`).join(", ");
+}
+
+const chipCls = (selected: boolean) =>
+  `px-2 py-0.5 rounded-full border text-xs font-medium transition-colors ${
+    selected
+      ? "bg-cyan-500/15 border-cyan-500/40 text-cyan-300"
+      : "bg-zinc-800 border-zinc-700 text-zinc-500 hover:text-zinc-300"
+  }`;
+
 export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
   const { selectedGpuIndex } = useCurveStore();
   const [fanState, setFanState] = useState<FanState | null>(null);
@@ -54,6 +77,9 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
   const [confirmApply, setConfirmApply] = useState(false);
   const [confirmReset, setConfirmReset] = useState(false);
   const [dragIdx, setDragIdx] = useState<number | null>(null);
+  // Fan selection: undefined = no pending change (follow server state),
+  // null = all fans, list = specific fan indices.
+  const [fanSel, setFanSel] = useState<number[] | null | undefined>(undefined);
   const svgRef = useRef<SVGSVGElement>(null);
 
   async function fetchFans() {
@@ -61,6 +87,7 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
       setLoading(true);
       const data = await api.fans(selectedGpuIndex);
       setFanState(data);
+      setFanSel(undefined);
       if (data.curve && data.curve.length > 0) {
         setPending(null);
       }
@@ -83,14 +110,41 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
   const curveActive = fanState?.curve_active ?? false;
   const isDefaults = !pending && !fanState?.curve;
 
+  const fanTargets =
+    fanSel === undefined ? (fanState?.fan_targets ?? null) : fanSel;
+  const fansChanged =
+    fanSel !== undefined && !sameTargets(fanSel, fanState?.fan_targets ?? null);
+  const fanList: FanInfo[] =
+    fanState?.fans && fanState.fans.length > 0
+      ? fanState.fans
+      : [{ index: 0, fan_pct: null }];
+
+  function toggleFan(idx: number) {
+    const numFans = fanState?.num_fans ?? 1;
+    let list: number[];
+    if (fanTargets === null) {
+      // Start from all fans, then drop the toggled one
+      list = Array.from({ length: numFans }, (_, i) => i).filter(
+        (i) => i !== idx,
+      );
+    } else {
+      list = fanTargets.includes(idx)
+        ? fanTargets.filter((i) => i !== idx)
+        : [...fanTargets, idx].sort((a, b) => a - b);
+    }
+    if (list.length === 0) return; // keep at least one fan selected
+    setFanSel(list.length === numFans ? null : list);
+  }
+
   async function handleApply() {
     const curveToApply = pending ?? fanState?.curve ?? defaultCurve();
     if (curveToApply.length < 2) return;
     setBusy(true);
     setError(null);
     try {
-      await api.updateFans(curveToApply, selectedGpuIndex);
+      await api.updateFans(curveToApply, selectedGpuIndex, fanTargets);
       setPending(null);
+      setFanSel(undefined);
       setConfirmApply(false);
       await fetchFans();
       onChanged?.();
@@ -109,6 +163,7 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
     try {
       await api.resetFans(selectedGpuIndex);
       setPending(null);
+      setFanSel(undefined);
       setConfirmReset(false);
       await fetchFans();
       onChanged?.();
@@ -251,9 +306,10 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
             <button
               onClick={() => {
                 setPending(null);
+                setFanSel(undefined);
                 setError(null);
               }}
-              disabled={!hasPending || busy}
+              disabled={(!hasPending && !fansChanged) || busy}
               className="flex items-center gap-1.5 px-2 py-1 rounded bg-zinc-800 hover:bg-zinc-700 text-zinc-300 text-xs transition-colors disabled:opacity-40 disabled:cursor-not-allowed"
             >
               <X size={12} />
@@ -270,6 +326,48 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
           </div>
         </div>
 
+        {/* Fan selection */}
+        <div className="px-4 py-2 border-b border-zinc-800/60 flex items-center gap-2 flex-wrap">
+          <span className="text-xs text-zinc-500 uppercase tracking-wider font-semibold">
+            Fans
+          </span>
+          {fanState?.num_fans === 0 ? (
+            <span className="text-xs text-zinc-600">
+              No fans available on this GPU
+            </span>
+          ) : (
+            <>
+              <button
+                onClick={() => setFanSel(null)}
+                className={chipCls(fanTargets === null)}
+                title="Control all fans"
+              >
+                All
+              </button>
+              {fanList.map((f) => (
+                <button
+                  key={f.index}
+                  onClick={() => toggleFan(f.index)}
+                  className={chipCls(
+                    fanTargets === null || fanTargets.includes(f.index),
+                  )}
+                  title={`Control Fan ${f.index + 1} with the curve`}
+                >
+                  Fan {f.index + 1}
+                  <span className="ml-1.5 font-mono text-[10px] opacity-80">
+                    {f.fan_pct !== null ? `${Math.round(f.fan_pct)}%` : "—"}
+                  </span>
+                </button>
+              ))}
+            </>
+          )}
+          {fansChanged && (
+            <span className="inline-flex items-center gap-1 px-2 py-0.5 rounded-full bg-cyan-500/15 border border-cyan-500/30 text-cyan-400 text-xs">
+              Fans: {fanLabel(fanTargets)}
+            </span>
+          )}
+        </div>
+
         {/* Error banner */}
         {error && (
           <div className="px-3 py-1.5 bg-red-900/40 border-b border-red-700 text-red-300 text-xs flex items-center justify-between">
@@ -557,13 +655,14 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
         {/* Info */}
         <div className="px-4 pb-3 text-[10px] text-zinc-600">
           {curveActive
-            ? "Fan curve is active. Server adjusts fan speed based on GPU temperature."
+            ? `Fan curve is active — controlling ${fanLabel(fanTargets)}. Server adjusts fan speed based on GPU temperature.`
             : isDefaults
               ? "These are default values. Click Apply to enable curve control, or edit points first."
               : "Apply a curve to enable automatic fan control based on temperature."}
           <span className="block mt-1 text-zinc-700">
             Drag points to adjust · click the chart to add a point · click the ✕
-            (chart or table) to remove one.
+            (chart or table) to remove one · pick which fans the curve controls
+            above.
           </span>
         </div>
       </div>
@@ -571,7 +670,7 @@ export function FanCurveEditor({ onChanged }: { onChanged?: () => void }) {
       {confirmApply && (
         <ConfirmDialog
           message="Apply fan curve?"
-          detail="Fan control will switch to curve-based mode. The server will adjust fan speed based on GPU temperature."
+          detail={`Fan control will switch to curve-based mode for ${fanLabel(fanTargets)}. The server will adjust fan speed based on GPU temperature.`}
           confirmLabel="Apply"
           onConfirm={handleApply}
           onCancel={() => setConfirmApply(false)}

frontend/src/components/Monitor/FanMonitor.tsx

@@ -47,6 +47,8 @@ export function FanMonitor({
 }: Props) {
   const fanHistory = pluck(history, "fan_pct");
   const tempHistory = pluck(history, "temp_c");
+  const fans = monitor?.fans ?? null;
+  const multiFan = fans !== null && fans.length > 1;
 
   const currentTemp = monitor?.temp_c ?? null;
   const targetFan = computeTargetFan(fanCurve, currentTemp);
@@ -68,6 +70,18 @@ export function FanMonitor({
           )}
         </div>
         <div className="flex flex-col gap-2 mt-1">
+          {multiFan ? (
+            fans!.map((_, i) => (
+              <GaugeCard
+                key={i}
+                label={`Fan ${i + 1}`}
+                value={fmt.pct(fans![i])}
+                history={history.map((s) => s.fans?.[i] ?? s.fan_pct ?? 0)}
+                color="#fb923c"
+                max={100}
+              />
+            ))
+          ) : (
             <GaugeCard
               label="Fan Speed"
               value={fmt.pct(monitor?.fan_pct)}
@@ -75,6 +89,7 @@ export function FanMonitor({
               color="#fb923c"
               max={100}
             />
+          )}
           <GaugeCard
             label="GPU Temp"
             value={fmt.celsius(monitor?.temp_c)}

frontend/src/types.ts

@@ -25,6 +25,7 @@ export interface MonitoringSample {
   temp_c: number | null;
   power_w: number | null;
   fan_pct: number | null;
+  fans: (number | null)[] | null;
   pstate: number | null;
   pstate_label: string | null;
   mem_used_bytes: number | null;
@@ -111,13 +112,22 @@ export interface FanPoint {
   fan_pct: number;
 }
 
+export interface FanInfo {
+  index: number;
+  fan_pct: number | null;
+}
+
 export interface FanState {
   fan_pct: number | null;
+  fans: FanInfo[] | null;
+  num_fans: number | null;
   fan_mode: "auto" | "curve" | null;
   min_fan_pct: number | null;
   max_fan_pct: number | null;
   curve: FanPoint[] | null;
   curve_active: boolean;
+  // Fan indices controlled by the active curve; null = all fans.
+  fan_targets: number[] | null;
 }
 
 export interface ProfileData {
@@ -127,4 +137,5 @@ export interface ProfileData {
   mem_offset_mhz: number | null;
   power_limit_w: number | null;
   fan_curve: FanPoint[] | null;
+  fan_targets: number[] | null;
 }

nvcurve/config.py

@@ -34,8 +34,10 @@ class Config:
     # curve applied via the UI survives server restarts (fan control itself is
     # volatile — the driver reverts to automatic mode on reboot).
     # Key = stable GPU identifier (same as auto_load_profiles).
-    # Value = list of {"temp_c": int, "fan_pct": int} sorted by temp_c.
+    # Value = {"curve": [{"temp_c": int, "fan_pct": int}, ...] sorted by temp_c,
-    fan_curves: dict[str, list] = field(default_factory=dict)
+    #          "fans": [fan indices] | None (None = all fans)}.
+    # Legacy entries (bare curve list) are migrated at load time.
+    fan_curves: dict[str, object] = field(default_factory=dict)
 
 
 # Module-level default config instance.

nvcurve/hal/fans.py

@@ -1,10 +1,15 @@
 """Hardware Abstraction Layer for Fan Control.
 
 Uses NVML (via pynvml) for all operations:
+  - nvmlDeviceGetNumFans             : number of fans on the device
   - nvmlDeviceGetFanSpeed_v2         : read current fan speed % for a fan index
   - nvmlDeviceSetFanSpeed_v2         : set fan speed % for a fan index
+  - nvmlDeviceSetDefaultFanSpeed_v2  : restore automatic control for a fan index
   - nvmlDeviceGetMinMaxFanSpeed      : get min/max fan speed constraints
   - nvmlDeviceGetTemperature         : read GPU temp for curve interpolation
+
+Fans are addressed by 0-based index. Passing ``fans=None`` to the set/reset
+helpers means "all fans on the device".
 """
 
 import ctypes
@@ -24,9 +29,6 @@ pynvml: Any = _pynvml_import
 
 log = logging.getLogger("nvcurve.hal.fans")
 
-# We use fan index 0 (first/primary fan) for all operations.
-_FAN_INDEX = 0
-
 
 def _get_handle(gpu_index: int):
     """Return an NVML device handle."""
@@ -35,13 +37,42 @@ def _get_handle(gpu_index: int):
     return pynvml.nvmlDeviceGetHandleByIndex(gpu_index)
 
 
+def _num_fans(handle) -> int:
+    """Return the number of fans on the device (>= 1 on query failure)."""
+    try:
+        return max(0, int(pynvml.nvmlDeviceGetNumFans(handle)))
+    except pynvml.NVMLError:
+        # GetNumFans unsupported: assume at least the primary fan exists.
+        return 1
+
+
+def get_num_fans(gpu_index: int = 0) -> int:
+    """Return the number of fans on the GPU (0 if NVML is unavailable)."""
+    if not _NVML_AVAILABLE:
+        return 0
+    try:
+        return _num_fans(_get_handle(gpu_index))
+    except pynvml.NVMLError as exc:
+        log.warning("get_num_fans: %s", exc)
+        return 0
+
+
 def get_fan_info(gpu_index: int = 0) -> dict:
-    """Return current fan state: fan_pct, fan_mode, min_fan_pct, max_fan_pct.
+    """Return current fan state for all fans.
+
+    Returns a dict with:
+      fan_pct     : current speed % of fan 0 (legacy, None on failure)
+      fans        : [{"index": i, "fan_pct": pct | None}, ...] per fan
+      num_fans    : number of fans on the device
+      fan_mode    : None (the server derives "auto"/"curve")
+      min_fan_pct / max_fan_pct : device-wide speed constraints
 
     Returns None values on failure.
     """
-    out: dict[str, float | None] = {
+    out: dict[str, Any] = {
         "fan_pct": None,
+        "fans": [],
+        "num_fans": 0,
         "fan_mode": None,
         "min_fan_pct": None,
         "max_fan_pct": None,
@@ -50,16 +81,26 @@ def get_fan_info(gpu_index: int = 0) -> dict:
         return out
     try:
         handle = _get_handle(gpu_index)
+    except pynvml.NVMLError as exc:
+        log.warning("get_fan_info: %s", exc)
+        return out
 
-        # Get current fan speed using v2 API (fan index 0)
+    out["num_fans"] = _num_fans(handle)
+
+    # Per-fan speeds via the v2 API; fan 0 falls back to the legacy v1 API.
+    for i in range(out["num_fans"]):
+        pct: float | None = None
         try:
-            out["fan_pct"] = float(pynvml.nvmlDeviceGetFanSpeed_v2(handle, _FAN_INDEX))
+            pct = float(pynvml.nvmlDeviceGetFanSpeed_v2(handle, i))
         except pynvml.NVMLError:
-            # Fallback to legacy v1 API
+            if i == 0:
                 try:
-                out["fan_pct"] = float(pynvml.nvmlDeviceGetFanSpeed(handle))
+                    pct = float(pynvml.nvmlDeviceGetFanSpeed(handle))
                 except pynvml.NVMLError:
-                pass
+                    pct = None
+        out["fans"].append({"index": i, "fan_pct": pct})
+
+    out["fan_pct"] = out["fans"][0]["fan_pct"] if out["fans"] else None
 
     # Get min/max fan speed constraints
     try:
@@ -72,14 +113,22 @@ def get_fan_info(gpu_index: int = 0) -> dict:
         out["min_fan_pct"] = 0
         out["max_fan_pct"] = 100
 
-    except pynvml.NVMLError as exc:
-        log.warning("get_fan_info: %s", exc)
-
     return out
 
 
-def set_fan_speed(gpu_index: int, pct: int) -> tuple[bool, str]:
+def set_fan_speed(
-    """Set fan speed to a percentage (0-100) on the primary fan."""
+    gpu_index: int,
+    pct: int,
+    fans: list[int] | None = None,
+) -> tuple[bool, str]:
+    """Set fan speed to a percentage (0-100).
+
+    fans=None targets every fan on the device; fans=[0, 1] targets the
+    listed fan indices. In all-fans mode, fans the driver does not allow
+    manual control of (e.g. driver-mirrored secondary fans) are skipped
+    with a warning instead of failing the whole operation; explicit fan
+    lists are strict and fail if any selected fan cannot be set.
+    """
     try:
         pct = max(0, min(100, int(pct)))
     except (TypeError, ValueError):
@@ -88,7 +137,47 @@ def set_fan_speed(gpu_index: int, pct: int) -> tuple[bool, str]:
         return False, "NVML not available"
     try:
         handle = _get_handle(gpu_index)
-        pynvml.nvmlDeviceSetFanSpeed_v2(handle, _FAN_INDEX, pct)
+        num_fans = _num_fans(handle)
+
+        if fans is None:
+            targets = list(range(num_fans))
+            strict = False
+        else:
+            targets: list[int] = []
+            for f in fans:
+                try:
+                    f = int(f)
+                except (TypeError, ValueError):
+                    return False, f"Invalid fan index: {f!r}"
+                if f < 0 or f >= num_fans:
+                    return False, f"Fan index {f} out of range (0-{num_fans - 1})"
+                targets.append(f)
+            strict = True
+            if not targets:
+                return False, "No fans selected"
+
+        if not targets:
+            return False, "No fans available on this GPU"
+
+        skipped: list[str] = []
+        for i in targets:
+            try:
+                pynvml.nvmlDeviceSetFanSpeed_v2(handle, i, pct)
+            except pynvml.NVMLError as exc:
+                if strict:
+                    log.warning(
+                        "set_fan_speed(%d, fan %d, %d): %s", gpu_index, i, pct, exc
+                    )
+                    return False, str(exc)
+                # All-fans mode: secondary fans may be driver-controlled and
+                # reject manual writes; skip them and report in the message.
+                log.debug("set_fan_speed: fan %d not settable: %s", i, exc)
+                skipped.append(f"fan {i + 1}")
+        if skipped:
+            return (
+                True,
+                f"OK ({len(skipped)} fan(s) not manually controllable: {', '.join(skipped)})",
+            )
         return True, "OK"
     except pynvml.NVMLError as exc:
         log.warning("set_fan_speed(%d, %d): %s", gpu_index, pct, exc)
@@ -96,10 +185,11 @@ def set_fan_speed(gpu_index: int, pct: int) -> tuple[bool, str]:
 
 
 def reset_fan(gpu_index: int = 0) -> tuple[bool, str]:
-    """Restore automatic fan control.
+    """Restore automatic fan control for all fans.
 
-    Tries nvidia-smi --fan=default first (most reliable), then falls back to
+    Tries nvidia-smi --fan=default first (most reliable, resets all fans on
-    NVML nvmlDeviceSetDefaultFanSpeed_v2.
+    the device), then falls back to NVML nvmlDeviceSetDefaultFanSpeed_v2
+    per fan index.
     """
     if not _NVML_AVAILABLE:
         return False, "NVML not available"
@@ -124,10 +214,14 @@ def reset_fan(gpu_index: int = 0) -> tuple[bool, str]:
     except Exception as exc:
         log.debug("nvidia-smi -fan default error: %s", exc)
 
-    # Fallback: use NVML to reset to default fan speed
+    # Fallback: use NVML to reset every fan to default speed
     try:
         handle = _get_handle(gpu_index)
-        pynvml.nvmlDeviceSetDefaultFanSpeed_v2(handle, _FAN_INDEX)
+        for i in range(_num_fans(handle)):
+            try:
+                pynvml.nvmlDeviceSetDefaultFanSpeed_v2(handle, i)
+            except pynvml.NVMLError as exc:
+                log.debug("reset_fan: fan %d: %s", i, exc)
         return True, "OK"
     except pynvml.NVMLError as exc:
         return False, f"Failed to reset fan: {exc}"

nvcurve/hal/monitoring.py

@@ -162,6 +162,20 @@ def _nvml_read(gpu_index: int) -> dict:
         with contextlib.suppress(_pynvml.NVMLError):
             out["fan_pct"] = float(_pynvml.nvmlDeviceGetFanSpeed(handle))
 
+        # Per-fan speeds via the v2 API (fan_pct above stays fan 0 for legacy clients).
+        try:
+            num_fans = int(_pynvml.nvmlDeviceGetNumFans(handle))
+            fan_list: list[float | None] = []
+            for i in range(num_fans):
+                try:
+                    fan_list.append(float(_pynvml.nvmlDeviceGetFanSpeed_v2(handle, i)))
+                except _pynvml.NVMLError:
+                    fan_list.append(None)
+            if fan_list:
+                out["fans"] = fan_list
+        except _pynvml.NVMLError:
+            pass
+
         with contextlib.suppress(_pynvml.NVMLError):
             out["throttle_reasons"] = int(
                 _pynvml.nvmlDeviceGetCurrentClocksThrottleReasons(handle)

nvcurve/nvapi/types.py

@@ -61,6 +61,7 @@ class MonitoringSample:
     pcie_link_width: int | None = None  # Current PCIe link width (x1..x16)
     pcie_link_generation: int | None = None  # Current PCIe link generation (1..5)
     mem_temp_c: float | None = None  # VRAM temperature (if the GPU exposes it)
+    fans: list[float | None] | None = None  # Per-fan speed % (index-aligned)
 
 
 @dataclass

nvcurve/profiles/native.py

@@ -17,6 +17,8 @@ class ProfileData:
     mem_offset_mhz: int | None = None
     power_limit_w: int | None = None
     fan_curve: list[dict[str, int]] | None = None
+    # Fan indices controlled by fan_curve (0-based); None = all fans.
+    fan_targets: list[int] | None = None
 
 
 def save_profile(profile_dir: str, data: ProfileData) -> str:

nvcurve/server.py

@@ -24,6 +24,7 @@ from .config import Config, default_config
 from .hal.dashboard import get_dashboard_info
 from .hal.fans import (
     get_fan_info,
+    get_num_fans,
     get_temp,
     interpolate_fan_speed,
     reset_fan,
@@ -149,6 +150,7 @@ def _sample_dict(s) -> dict:
         "temp_c": s.temp_c,
         "power_w": s.power_w,
         "fan_pct": s.fan_pct,
+        "fans": s.fans,
         "pstate": s.pstate,
         "pstate_label": f"P{s.pstate}" if s.pstate is not None else None,
         "mem_used_bytes": s.mem_used_bytes,
@@ -219,7 +221,8 @@ async def _monitor_poller(gpu_index: int) -> None:
 
 
 async def _fan_poller(gpu_index: int) -> None:
-    """Continuously read GPU temp, interpolate fan speed from active curve, and apply."""
+    """Continuously read GPU temp, interpolate fan speed from active curve, and apply it to the target fans."""
+    last_write_error: str | None = None
     while True:
         try:
             g_state = _state["gpus"].get(gpu_index)
@@ -229,7 +232,25 @@ async def _fan_poller(gpu_index: int) -> None:
                     curve = g_state["fan_curve"]
                     target = interpolate_fan_speed(curve, temp)
                     if target is not None:
-                        await _run(set_fan_speed, gpu_index, target)
+                        ok, msg = await _run(
+                            set_fan_speed,
+                            gpu_index,
+                            target,
+                            g_state.get("fan_targets"),
+                        )
+                        if not ok:
+                            # Log once per distinct failure so a stuck target
+                            # list doesn't spam a warning every 2 s tick.
+                            if msg != last_write_error:
+                                log.warning(
+                                    "Fan write failed for GPU %d (targets=%s): %s",
+                                    gpu_index,
+                                    g_state.get("fan_targets"),
+                                    msg,
+                                )
+                            last_write_error = msg
+                        else:
+                            last_write_error = None
         except asyncio.CancelledError:
             return
         except Exception as exc:
@@ -237,15 +258,34 @@ async def _fan_poller(gpu_index: int) -> None:
         await asyncio.sleep(2.0)
 
 
-async def _activate_fan_curve(gpu_index: int, curve: list) -> None:
+async def _activate_fan_curve(
+    gpu_index: int, curve: list, fans: list[int] | None = None
+) -> None:
     """Set the active fan curve, (re)start the poller, and persist it.
 
-    Persistence (config.json) is what makes the curve survive server restarts:
+    fans=None targets all fans on the device; a list targets the given
-    fan control is volatile, so the driver reverts to automatic mode on reboot
+    fan indices. Persistence (config.json) is what makes the curve survive
-    and the saved curve is re-applied at the next server start.
+    server restarts: fan control is volatile, so the driver reverts to
+    automatic mode on reboot and the saved curve is re-applied at the next
+    server start.
     """
     g_state = _get_gpu_state(gpu_index)
 
+    # Validate explicit fan targets against the hardware. Stale indices
+    # (e.g. a profile saved on a 2-fan GPU applied to a 1-fan GPU, or a
+    # persisted entry restored after a hardware change) would otherwise
+    # make the poller fail silently on every tick.
+    if fans is not None:
+        num_fans = await _run(get_num_fans, gpu_index)
+        if not fans or (num_fans > 0 and any(f < 0 or f >= num_fans for f in fans)):
+            log.warning(
+                "Fan targets %s invalid for GPU %d (%d fan(s)); falling back to all fans",
+                fans,
+                gpu_index,
+                num_fans,
+            )
+            fans = None
+
     # Stop existing poller if running
     if g_state.get("fan_poller_task"):
         g_state["fan_poller_task"].cancel()
@@ -254,10 +294,11 @@ async def _activate_fan_curve(gpu_index: int, curve: list) -> None:
 
     g_state["fan_curve"] = curve
     g_state["fan_curve_active"] = True
+    g_state["fan_targets"] = fans
     g_state["fan_poller_task"] = asyncio.create_task(_fan_poller(gpu_index))
 
     cfg: Config = _state["config"]
-    cfg.fan_curves[_gpu_stable_key(gpu_index)] = curve
+    cfg.fan_curves[_gpu_stable_key(gpu_index)] = {"curve": curve, "fans": fans}
     _persist_fan_curves(cfg.fan_curves)
 
 
@@ -276,6 +317,7 @@ async def _deactivate_fan_curve(gpu_index: int, reset_hardware: bool = True) ->
 
     g_state["fan_curve"] = None
     g_state["fan_curve_active"] = False
+    g_state["fan_targets"] = None
 
     if reset_hardware:
         ok, msg = await _run(reset_fan, gpu_index)
@@ -389,7 +431,15 @@ async def lifespan(app: FastAPI):
         if g_state.get("fan_curve_active"):
             continue  # already activated by the auto-load profile path
         key = _gpu_stable_key(gpu_index)
-        curve = cfg.fan_curves.get(key)
+        entry = cfg.fan_curves.get(key)
+        if not entry:
+            continue
+        # Migrate the legacy format (bare curve list) to the current
+        # {"curve": ..., "fans": ...} shape; legacy entries targeted all fans.
+        if isinstance(entry, list):
+            entry = {"curve": entry, "fans": None}
+        curve = entry.get("curve") if isinstance(entry, dict) else None
+        fans = entry.get("fans") if isinstance(entry, dict) else None
         if not curve:
             continue
         ok, msg = validate_curve(curve)
@@ -398,7 +448,7 @@ async def lifespan(app: FastAPI):
             continue
         log.info("Restoring persisted fan curve on GPU %d (%s)", gpu_index, key)
         try:
-            await _activate_fan_curve(gpu_index, curve)
+            await _activate_fan_curve(gpu_index, curve, fans)
         except Exception as exc:
             log.warning(
                 "Failed to restore persisted fan curve on GPU %d: %s",
@@ -543,10 +593,14 @@ class FanCurvePoint(BaseModel):
 
 class FanCurveRequest(BaseModel):
     curve: list[FanCurvePoint]
+    # Fan indices to control (0-based); None = all fans on the device.
+    fans: list[int] | None = None
 
 
 class FanSpeedRequest(BaseModel):
     fan_pct: int
+    # Specific fan index to set (0-based); None = all fans on the device.
+    fan: int | None = None
 
 
 class LoginRequest(BaseModel):
@@ -873,6 +927,9 @@ async def api_profile_save(req: ProfileSaveRequest, gpu_index: int = 0):
         mem_offset_mhz=mem_offset_mhz,
         power_limit_w=power_limit_w,
         fan_curve=g_state.get("fan_curve") if g_state.get("fan_curve_active") else None,
+        fan_targets=g_state.get("fan_targets")
+        if g_state.get("fan_curve_active")
+        else None,
     )
     filepath = await _run(save_profile, cfg.profile_dir, data)
     g_state["active_profile"] = req.name
@@ -1024,7 +1081,7 @@ async def _apply_profile(name: str, gpu_index: int = 0) -> list[str]:
         if not ok:
             errs.append(f"Fan curve: {msg}")
         else:
-            await _activate_fan_curve(gpu_index, profile.fan_curve)
+            await _activate_fan_curve(gpu_index, profile.fan_curve, profile.fan_targets)
     elif g_state.get("fan_curve_active"):
         await _deactivate_fan_curve(gpu_index, reset_hardware=True)
 
@@ -1226,7 +1283,7 @@ async def api_limits_reset(gpu_index: int = 0):
 
 @app.get("/api/fans")
 async def api_fans(gpu_index: int = 0):
-    """Current fan state: fan %, curve, and whether curve control is active."""
+    """Current fan state: per-fan %, curve, and whether curve control is active."""
     _get_gpu_state(gpu_index)
     g_state = _state["gpus"][gpu_index]
     info = await _run(get_fan_info, gpu_index)
@@ -1236,12 +1293,16 @@ async def api_fans(gpu_index: int = 0):
         "fan_mode": "curve" if curve_active else "auto",
         "curve": g_state.get("fan_curve"),
         "curve_active": curve_active,
+        "fan_targets": g_state.get("fan_targets"),
     }
 
 
 @app.post("/api/fans")
 async def api_fans_update(req: FanCurveRequest, gpu_index: int = 0):
-    """Set or update the fan curve. Starts the fan control poller."""
+    """Set or update the fan curve. Starts the fan control poller.
+
+    req.fans selects which fans the curve drives (None = all fans).
+    """
     g_state = _get_gpu_state(gpu_index)
 
     curve_data = [{"temp_c": p.temp_c, "fan_pct": p.fan_pct} for p in req.curve]
@@ -1249,6 +1310,8 @@ async def api_fans_update(req: FanCurveRequest, gpu_index: int = 0):
     if not ok:
         raise HTTPException(status_code=400, detail=msg)
 
+    fans = sorted(set(req.fans)) if req.fans is not None else None
+
     # Test that fan control is available on this GPU, probing with the
     # target for the *current* temperature so the fan is never briefly
     # set to an inappropriate speed.
@@ -1261,14 +1324,14 @@ async def api_fans_update(req: FanCurveRequest, gpu_index: int = 0):
         )
         target = interpolate_fan_speed(curve_data, test_temp)
         if target is not None:
-            fan_ok, fan_msg = await _run(set_fan_speed, gpu_index, target)
+            fan_ok, fan_msg = await _run(set_fan_speed, gpu_index, target, fans)
             if not fan_ok:
                 raise HTTPException(
                     status_code=500, detail=f"Fan control not available: {fan_msg}"
                 )
 
     # Activate the curve (starts the poller) and persist it so it survives restarts.
-    await _activate_fan_curve(gpu_index, curve_data)
+    await _activate_fan_curve(gpu_index, curve_data, fans)
 
     return {"ok": True}
 
@@ -1287,10 +1350,14 @@ async def api_fans_reset(gpu_index: int = 0):
 
 @app.post("/api/fans/speed")
 async def api_fans_speed(req: FanSpeedRequest, gpu_index: int = 0):
-    """One-shot set fan to an exact percentage (bypasses curve)."""
+    """One-shot set fan(s) to an exact percentage (bypasses curve).
+
+    req.fan selects a single fan index; None sets all fans.
+    """
     _get_gpu_state(gpu_index)
     pct = max(0, min(100, req.fan_pct))
-    ok, msg = await _run(set_fan_speed, gpu_index, pct)
+    fans = [req.fan] if req.fan is not None else None
+    ok, msg = await _run(set_fan_speed, gpu_index, pct, fans)
     if not ok:
         raise HTTPException(status_code=500, detail=msg)
     return {"ok": True}