Standalone support for the ThermalGrizzly WireView Pro II without
depending on the external wireview_reporter exporter:
- wireview.py: serial protocol (STX/ETX + 16-bit CRC16-CCITT) with
vendor-data product identification, config version, UID, build
string, screen layout, and temperature/power/current sensor reads;
hwmon fallback with per-channel index resolution; udev-based
detection (vendor 0x2560 / product 0x0101) with fallback port
probing; serial read timeout and watchdog reconnect
- server.py: startup detection (root only), 1 Hz poller gated on
subscribed clients, WS 'wireview' channel, GET /api/wireview,
rejected-product memoization, stale-read race guard
- frontend: WireView tab (visible when a device is detected) with
live temperature/power/current cards, sparkline history, and
device info; nullable temp channels
- tests: 76 tests covering parser, CRC, fault classification,
hwmon resolution, JSON safety, and the serial transport against
a pty-based fake device
Verified live: tab appears with the device connected, disappears
when unplugged, reconnects on re-plug, no serial traffic when idle.
Adds an experimental power-cap mode using the undocumented RM ioctl
interface (based on panchovix's LACT PR #1205) to set power limits
below the VBIOS minimum (down to 30 W).
- hal/rm_power.py: RM ioctl power-cap read/write/reset + runtime probe
- limits.py: power_cap_mode (nvml/ioctl) with support detection
- config.py: persist power_cap_mode per GPU
- profiles: record/apply power_cap_mode
- server.py: POST /api/limits validates ioctl support (409 on failure)
- cli.py: profile save falls back to persisted mode
- client.py: power_cap_mode in Limits
- frontend: toggle + warning with panchovix attribution (LACT #1205)
- tests: test_rm_power.py (unit) + integration coverage
- Makefile: add test_rm_power.py to make test
Also includes automated linter reformatting (prettier, ruff, shellcheck,
isort, markdownlint) that the linter would apply anyway.
- hatch_build.py: custom hatchling build hook that compiles the React
frontend (npm ci + build) when frontend/dist is missing or stale, so
'uv tool install git+https://gitea.zephyre.one/Pakobbix/nvcurve.git'
works as a single command
- install.sh: curl|bash installer (checks prerequisites, auto-installs uv,
clones and installs)
- Makefile: dev targets (frontend, install, dev, test, clean)
- README/docs: document the one-liner, clone, and direct-git installs
ARIA