Port of the wireview-linux firmware update feature:
- nvcurve/wireview_firmware.py: Intel-HEX parser (checksum-verified),
BuildStruct identity extraction (vendor/product/version/build string
at image base + 192), compatibility verdicts (version then build
date, Noctua Edition product alias + 2026-09-02 floor), and a
dfu-util flasher (progress parsing, exit-74-after-:leave quirk,
timeouts).
- Bundle TG-WV-PRO2-FW.hex (v05, build 20260902_0741, base
0x08000000) in nvcurve/firmware/.
- WireViewSerialDevice.enter_bootloader() sends the top-level 0xF1
command; vendor/product ids are exposed in info().
- GET /api/wireview/firmware (device vs. bundled verdict, dfu-util
availability, flash state) and POST /api/wireview/firmware/flash
(gates: serial transport, product match, Noctua floor, downgrade/
same require override). The flash runs as a background task
(bootloader -> wait for 0483:df11 -> dfu-util) with progress
streamed over /ws/wireview.
- WireView tab: Firmware card with device vs. bundled firmware,
verdict, dfu-util/hwmon warnings, confirm dialog, live progress
bar; re-checks after the device reboots.
- tests/test_wireview_firmware.py: 66 tests (HEX parser, checksum
rejection, identity, all verdict paths, mocked flasher, bootloader
command via pty); added to the Makefile test target.
- Docs: firmware section in docs/WireView.md, README note.
Add a GPU process table to the Performance tab showing which processes
use the selected GPU, with per-process VRAM, GPU utilization, CPU, host
memory, and command. Includes a kill endpoint (SIGTERM/SIGKILL, with
optional parent kill) behind a confirm dialog.
- nvcurve/hal/processes.py: NVML + /proc process enumeration
- server.py: GET /api/processes, POST /api/processes/kill (refuses to
signal init/kthreadd)
- frontend: ProcessList component, API client, types
- tests: test_processes.py
- docs: API reference for the new endpoints
Standalone support for the ThermalGrizzly WireView Pro II without
depending on the external wireview_reporter exporter:
- wireview.py: serial protocol (STX/ETX + 16-bit CRC16-CCITT) with
vendor-data product identification, config version, UID, build
string, screen layout, and temperature/power/current sensor reads;
hwmon fallback with per-channel index resolution; udev-based
detection (vendor 0x2560 / product 0x0101) with fallback port
probing; serial read timeout and watchdog reconnect
- server.py: startup detection (root only), 1 Hz poller gated on
subscribed clients, WS 'wireview' channel, GET /api/wireview,
rejected-product memoization, stale-read race guard
- frontend: WireView tab (visible when a device is detected) with
live temperature/power/current cards, sparkline history, and
device info; nullable temp channels
- tests: 76 tests covering parser, CRC, fault classification,
hwmon resolution, JSON safety, and the serial transport against
a pty-based fake device
Verified live: tab appears with the device connected, disappears
when unplugged, reconnects on re-plug, no serial traffic when idle.
Adds an experimental power-cap mode using the undocumented RM ioctl
interface (based on panchovix's LACT PR #1205) to set power limits
below the VBIOS minimum (down to 30 W).
- hal/rm_power.py: RM ioctl power-cap read/write/reset + runtime probe
- limits.py: power_cap_mode (nvml/ioctl) with support detection
- config.py: persist power_cap_mode per GPU
- profiles: record/apply power_cap_mode
- server.py: POST /api/limits validates ioctl support (409 on failure)
- cli.py: profile save falls back to persisted mode
- client.py: power_cap_mode in Limits
- frontend: toggle + warning with panchovix attribution (LACT #1205)
- tests: test_rm_power.py (unit) + integration coverage
- Makefile: add test_rm_power.py to make test
Also includes automated linter reformatting (prettier, ruff, shellcheck,
isort, markdownlint) that the linter would apply anyway.
- hatch_build.py: custom hatchling build hook that compiles the React
frontend (npm ci + build) when frontend/dist is missing or stale, so
'uv tool install git+https://gitea.zephyre.one/Pakobbix/nvcurve.git'
works as a single command
- install.sh: curl|bash installer (checks prerequisites, auto-installs uv,
clones and installs)
- Makefile: dev targets (frontend, install, dev, test, clean)
- README/docs: document the one-liner, clone, and direct-git installs