Port of the wireview-linux firmware update feature:
- nvcurve/wireview_firmware.py: Intel-HEX parser (checksum-verified),
BuildStruct identity extraction (vendor/product/version/build string
at image base + 192), compatibility verdicts (version then build
date, Noctua Edition product alias + 2026-09-02 floor), and a
dfu-util flasher (progress parsing, exit-74-after-:leave quirk,
timeouts).
- Bundle TG-WV-PRO2-FW.hex (v05, build 20260902_0741, base
0x08000000) in nvcurve/firmware/.
- WireViewSerialDevice.enter_bootloader() sends the top-level 0xF1
command; vendor/product ids are exposed in info().
- GET /api/wireview/firmware (device vs. bundled verdict, dfu-util
availability, flash state) and POST /api/wireview/firmware/flash
(gates: serial transport, product match, Noctua floor, downgrade/
same require override). The flash runs as a background task
(bootloader -> wait for 0483:df11 -> dfu-util) with progress
streamed over /ws/wireview.
- WireView tab: Firmware card with device vs. bundled firmware,
verdict, dfu-util/hwmon warnings, confirm dialog, live progress
bar; re-checks after the device reboots.
- tests/test_wireview_firmware.py: 66 tests (HEX parser, checksum
rejection, identity, all verdict paths, mocked flasher, bootloader
command via pty); added to the Makefile test target.
- Docs: firmware section in docs/WireView.md, README note.
- Per-pin bar now scales against the 9.2 A per-pin rating (10 A full
scale, red at/over rating) instead of the 55 A total connector OCP
- Debounced app-wide warning banner (visible on all tabs) when the
current between two pins diverges by > 2 A for ~7 s - the signature
of a bad pin contact that can overheat and melt the 12VHPWR
connector; 5 s grace period after clearing
- New pin_imbalance_a sample field (max - min pin current) in both the
serial and hwmon sample builders, plus frontend type
- Docs: README + WireView.md cover the warning and threshold; fresh
screenshot with the new per-pin labels
- Tests: vitest setup + 9 unit tests for the debounce state machine;
3 new backend checks for pin_imbalance_a
Standalone support for the ThermalGrizzly WireView Pro II without
depending on the external wireview_reporter exporter:
- wireview.py: serial protocol (STX/ETX + 16-bit CRC16-CCITT) with
vendor-data product identification, config version, UID, build
string, screen layout, and temperature/power/current sensor reads;
hwmon fallback with per-channel index resolution; udev-based
detection (vendor 0x2560 / product 0x0101) with fallback port
probing; serial read timeout and watchdog reconnect
- server.py: startup detection (root only), 1 Hz poller gated on
subscribed clients, WS 'wireview' channel, GET /api/wireview,
rejected-product memoization, stale-read race guard
- frontend: WireView tab (visible when a device is detected) with
live temperature/power/current cards, sparkline history, and
device info; nullable temp channels
- tests: 76 tests covering parser, CRC, fault classification,
hwmon resolution, JSON safety, and the serial transport against
a pty-based fake device
Verified live: tab appears with the device connected, disappears
when unplugged, reconnects on re-plug, no serial traffic when idle.