feat: wireview firmware check + DFU flash (bundled image, dfu-util)

Port of the wireview-linux firmware update feature:

- nvcurve/wireview_firmware.py: Intel-HEX parser (checksum-verified),
  BuildStruct identity extraction (vendor/product/version/build string
  at image base + 192), compatibility verdicts (version then build
  date, Noctua Edition product alias + 2026-09-02 floor), and a
  dfu-util flasher (progress parsing, exit-74-after-:leave quirk,
  timeouts).
- Bundle TG-WV-PRO2-FW.hex (v05, build 20260902_0741, base
  0x08000000) in nvcurve/firmware/.
- WireViewSerialDevice.enter_bootloader() sends the top-level 0xF1
  command; vendor/product ids are exposed in info().
- GET /api/wireview/firmware (device vs. bundled verdict, dfu-util
  availability, flash state) and POST /api/wireview/firmware/flash
  (gates: serial transport, product match, Noctua floor, downgrade/
  same require override). The flash runs as a background task
  (bootloader -> wait for 0483:df11 -> dfu-util) with progress
  streamed over /ws/wireview.
- WireView tab: Firmware card with device vs. bundled firmware,
  verdict, dfu-util/hwmon warnings, confirm dialog, live progress
  bar; re-checks after the device reboots.
- tests/test_wireview_firmware.py: 66 tests (HEX parser, checksum
  rejection, identity, all verdict paths, mocked flasher, bootloader
  command via pty); added to the Makefile test target.
- Docs: firmware section in docs/WireView.md, README note.
This commit is contained in:
ARIA committed 2026-10-05 20:07:19 +02:00
1 parent bf00e1149a
commit 1e11a2c18b
13 files changed
+9702 -7

No files matched your search

+1 -1
View File
@@ -15,7 +15,7 @@ NVCurve brings MSI Afterburner-style per-point voltage-frequency curve control t
> **Blackwell GPU memory** — This is a specialized fork with extended memory offset support (up to +3000 MHz) for Blackwell GPUs (RTX 50-series). \
> **Fan Controls** — There is an additional "Fans" tab to setup a customized fan curve, controlling all fans or individual fans. \
> **Dashboard** — The default tab is an Dashboard with additional information (PCIe link speed, VBIOS information, Max Core Clock, Throttle Reason and much much more.) \
> **WireView Pro II** — Native monitoring of the Thermal Grizzly WireView Pro II 12VHPWR connector: a dedicated tab shows live temperature, power and current readings — no external exporter or kernel module required. It also raises a big warning in the app header (visible on all tabs) when the current between two power pins diverges by more than 2 A — the signature of a bad pin contact (faulty cable/adapter) that can overheat and melt the connector. The host needs a one-time setup (udev rule + port access, see [WireView Pro II Setup](docs/WireView.md)); after that the device is auto-detected over USB and the tab only appears while it is connected. \
> **WireView Pro II** — Native monitoring of the Thermal Grizzly WireView Pro II 12VHPWR connector: a dedicated tab shows live temperature, power and current readings — no external exporter or kernel module required. It also raises a big warning in the app header (visible on all tabs) when the current between two power pins diverges by more than 2 A — the signature of a bad pin contact (faulty cable/adapter) that can overheat and melt the connector. The tab includes a firmware check/update: it compares the device firmware against the bundled image and can flash it over USB DFU (requires `dfu-util`). The host needs a one-time setup (udev rule + port access, see [WireView Pro II Setup](docs/WireView.md)); after that the device is auto-detected over USB and the tab only appears while it is connected. \
> **Authentication** — For production deployment, I added authentication with bcrypt hashing to allow only one or multiple people to have access. \
> Installing the pre-built PyPI package will NOT include these features. You must build from source.